Keeping robot covers and costumes clean
Anything a robot wears is touched, splashed and coughed near all day. In a café that's about presentation; in a commercial kitchen, hospital or aged-care home it is part of infection control. Here's how to keep fabric and film clean without harming the robot.
Before you clean
Switch the robot off before wiping it down or taking covers off.
Never spray liquid straight at the robot. Apply cleaner to a cloth first so it can't run into seams, vents or charging contacts.
Sensor windows, camera lenses and screens come with their own cleaning instructions from the manufacturer. Follow those, rather than using whatever product you use on the covers.
Cleaning by material
Each surface needs a slightly different approach.
Removable fabric covers
Wash to the care label. Turn them inside out to protect prints, and close hook-and-loop strips so they don't snag.
Vinyl wraps and film
Wipe with a soft cloth and mild detergent. Abrasive pads and harsh solvents can dull or lift the film.
Coated fabrics
Can be wiped on or off the robot. Check the care guide for which disinfectants the coating can take.
Trims and soft extras
Felt, faux fur and glitter are hard to clean properly. Keep them for short events and away from food.
Disinfectants and materials
Not every surface tolerates every disinfectant. Repeated use of some alcohol-based and chlorine-based products can dull, crack or discolour certain plastics, vinyls and coatings, and can fade dyed fabric. Read the disinfectant label and the material's care guidance, and test on a small hidden area first.
Smooth, non-porous surfaces are generally easier to disinfect than textured or woven ones, which is why wipe-clean finishes are preferred where hygiene matters most.
Leave the product wet for the contact time stated on its label, then dry the surface. A disinfectant only does its job when used as directed.
Food service and healthcare
Settings with stricter hygiene rules need a stricter approach.
- Your own rules come firstA kitchen's food safety program or a facility's infection prevention and control policy decides products and frequency. Robot clothing fits into that, not the other way round.
- Keep food areas simpleNear food, use smooth, wipeable surfaces only and leave off loose trims that could shed.
- Clean between areas if requiredWhere local policy calls for it, covers on a robot that moves between wards or wings are cleaned or changed in between.
- Involve infection control earlyIn hospitals and aged care, have the infection prevention lead approve any cover before it is used.
How often to clean
There's no single schedule, because it depends on where the robot works. A practical approach is to wipe high-touch areas like handles, trays and tray surrounds at least as often as tables in the same space, deal with visible spills straight away, and wash removable fabric on a cycle that matches how quickly it gets dirty.
A second set of covers lets one be in the wash while the other is on the robot.
Make sure fabric is completely dry before refitting it. Damp cloth held against a shell keeps moisture near seams and electronics and can grow mould.
Storing costumes between uses
Clean, dry, labelled and out of the sun.
Only put costumes and covers away after cleaning and drying them. Breathable bags or lidded boxes keep dust off without trapping moisture. Keep them away from direct sunlight, which fades colours, and from heat, which can make coated fabrics and adhesives tacky.
Label each item with the robot it fits and the occasion, and keep any small parts in the same bag.
For choosing covers that stand up to daily wear, see our sister guide on protecting a robot's shell in busy venues.
If your organisation is exploring service robots for hospitality or care, robotx.au has general information.